opel vauxhall m32 gearbox shifter cap - image

Files (1)

v1_v1.stl

STL

164.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
v1_v1.stl	Primary model	164.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

opel vauxhall m32 gearbox shifter cap

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Если вы снимали переключатель передач на кпп m32, то вы снимали одноразовую пробку. в этом случае, закрыть отверстие поможет эта крышка. If you removed the gear switch on the m32 gearbox, then you removed the one-time plug. In this case, this cover will help to close the hole.