Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Parcel shelf Bracket Pins - Rover 25 200 MG ZR (Hoedenplank)
Shared by
3DPrintedCarPartDescription
This is a pin to replace a broken or missing pin from the parcel shelf of a Rover 25/200 and MG ZR. You can press the part into the steel bar and snap the shelf in place. Dont use PLA because this will melt when the sun is heating up the car and make the part deform. And as always: Please share a picture or leave a comment after you printed this part, really appreciate it!
Compatible Cars
Originally published on thingiverse.com by Mike Franke (navyblueboss) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
