Peugeot 207 stock dash tweeter pod adapter - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Peugeot 207 stock dash tweeter pod adapter

0 downloads61 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I didn't want to cut out or drill in to anything, doors or A pillars so for now I made a simple adapter that fit in a place of a factory mounted tweeters. Tweeters that I have are around 42 mm in diameter (from an Excursion SHX-6C set) and they simply snap into place. There is a STEP file attached so feel free to make any changes.