Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Holder Car

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Many of you demanded a new Thing from me... ok NONE of you demanded a new Thing from me. I did it anyway. It´s a holder for your Smartphone and it fits quite good in the coin sorter of your Renault Trafic, Opel/Vauxhall Vivaro. I used 6 x 2 mm magnets to hold the phone in place. That means, you will need one of this small metal plates glued to the back of your phone. Or you take the step-file to use only the ground part and create your own solution. Have fun.