Phone Holder Opel / Vauxhall Adam (2016) - image

Files (6)

beugel.stl

STL

358.8 KB

holder1.stl

STL

173.2 KB

holder2.stl

STL

132.4 KB

knob.stl

STL

94.2 KB

nut.stl

STL

360.4 KB

proclip.stl

STL

304.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
beugel.stl	Printable file	358.8 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping
holder1.stl	Mount / bracket	173.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping
holder2.stl	Mount / bracket	132.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping
knob.stl	Printable file	94.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping
nut.stl	Printable file	360.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping
proclip.stl	Clip	304.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Holder Opel / Vauxhall Adam (2016)

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is inpired by Proclip design. I made the holder it for my Moto G7 Plus this is 77mm wide and 10mm thick. Holder can slide to about 62mm for smaller phones. No glueing needed just hook it behind the pillar. Clip is modular can be used for other self designed parts.