Pi Sleeve 12v Plug Mounting Bracket - image

Files (1)

Raspberry_coPilot.stl

STL

245.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Raspberry_coPilot.stl	Primary model	245.6 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the bracket and the Pi case if gluing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Pi Sleeve 12v Plug Mounting Bracket

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a mounting bracket for the Raspberry Pi Sleeve cases. I designed this bracket to be glued to your Pi case, and plugged into a cigarette lighter. The body of the bracket is meant to hold loose wires tightly like a spool. I designed this for the accessory input panel on my wife's Dodge Grand Caravan. With this, I can mount my Raspberry Pi in the car where it won't get damaged and I can use it to drive the entertainment system in the car. This is part of a larger project I posted on Instructables. http://www.instructables.com/id/CoPiLot-Mobile-Media-Center-PC/