Pioneer AVIC-F550BT Cover for Skoda - image

Files (1)

Pioneer_AVIC-F550BT_Skoda_cover_V3.stl

STL

1.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Pioneer_AVIC-F550BT_Skoda_cover_V3.stl	Cover / cap	1.5 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Pioneer AVIC-F550BT Cover for Skoda

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I wanted to create a simple cover to put on the Pioneer AV-Navigation system in my Skoda Fabia in order to make it less visible and hopefully less attractive for theft. It's a simple design and I prototyped it with simple PLA but I will most likely redo this with a better material that is less likely to warp under high temperatures (because it can get quite hot in the car during summer days).