Armrest 807688/C (VW, Skoda, ...) - image

Files (1)

807688-C.stl

STL

542.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

24g

Based on 25% main infill across listed model files

Material cost

$0.57

Filament only at roughly $24/kg PETG / ASA

Print time

41m–1.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
807688-C.stl	Primary model	542.9 KB STL	22g $0.52	24g $0.57	52g $1.25	Ensure proper adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Armrest 807688/C (VW, Skoda, ...)

0 downloads61 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Modified the part to fit the part 807688/C. This part is used for the armrest e.g. of the Skoda Rapid Spaceback. Adapted several parameters: * made the part bigger in width * created angle on the front upwards * decreased pin diameter to snap directly in the mounting holes * decreased mounting arms distance.