Pioneer TSX-200 Speaker Mount For Jeep Wrangler - image

Files (1)

Speaker_Mount_TopBottom-Final.stl

STL

394.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Speaker_Mount_TopBottom-Final.stl	Mount / bracket	394.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Pioneer TSX-200 Speaker Mount For Jeep Wrangler

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Use this to mount a Pioneer TSX-200 speaker on the rear passenger over wheel cover metal in an Early Jeep Wrangler YJ or TJ. Mount bottom plate in Vehicle and then mount top portion of speaker mount to the bottom of the speaker and then slide it in place. Can be printed on other printers using Simplify 3D or resident slicers, I used a DaVinci 1.0 which takes 1.75mm but also tried it on a Lulzbot mini with Cura and 3.0mm.