Plastic replacement parts for the landcrusier fj60 hood rod. - image

Files (2)

1985_fj60_hood_rod_catch.stl

STL

38.8 KB

1985_fj60_hood_rod_grommet.stl

STL

79.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1985_fj60_hood_rod_catch.stl	Printable file	38.8 KB STL	Slice file	Slice file	Slice file	Scale the model as needed to achieve a snug fit
1985_fj60_hood_rod_grommet.stl	Printable file	79.8 KB STL	Slice file	Slice file	Slice file	Scale the model as needed to achieve a snug fit

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

Plastic replacement parts for the landcrusier fj60 hood rod.

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the replacement parts for the grommet and the hood rod catch for a fj60 hood rod. Use outdoor appropriate plastics and you may need to scale +- a few percent depending on your printer settings. They should be snug and not wiggle when installed. If you use these, please give feedback on the fit and what filament you used.