Porsche 718 Cayman Front License Plate Mount - image

Files (1)

718_License_Plate_Mount.stl

STL

130.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 10%	100% solid	Recommendation
718_License_Plate_Mount.stl	Mount / bracket	130.3 KB STL	Slice file	Slice file	Slice file	Print with a layer height of .16mm for a smooth finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

Porsche 718 Cayman Front License Plate Mount

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have created a license plate mount that does not drill into the painted body panel. Instead, you drill vertically into the grill. The matte black solid grill right below the license plate mounting plate. See attached pictures - PETG (will not warp in the hot sun) DO NOT print in PLA -.16 Layer height - 40% infill - no supports.