Porsche 911 991 981 Wireless Charging tray - image

Files (4)

991_wireless_mat_tpu.step

STEP

17.3 KB

991_wireless_mat_tpu.stl

STL

2.2 KB

991_wireless_tray.step

STEP

196.5 KB

991_wireless_tray.stl

STL

2.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
991_wireless_mat_tpu.step	Accessory piece	17.3 KB STEP	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
991_wireless_mat_tpu.stl	Accessory piece	2.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
991_wireless_tray.step	Printable file	196.5 KB STEP	Slice file	Slice file	Slice file	Ensure the TPU mat is printed with a high infill percentage for maximum grip
991_wireless_tray.stl	Printable file	2.1 MB STL	Slice file	Slice file	Slice file	Ensure the TPU mat is printed with a high infill percentage for maximum grip

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Porsche 911 991 981 Wireless Charging tray

0 downloads23 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a wireless Android Auto setup in my Porsche 991, and so I designed this tray to work with a high speed Anker wireless charger. It is sized for a Samsung S20+ with case, but I included STEP so you can modify to fit your phone. With a snug fit the phone basically falls into the right position without much work. Used with Anker 15W PowerWave Alloy Charging Pad: https://smile.amazon.com/Anker-Wireless-Charger-Fast-Charging-Adapter/dp/B07YD77RKC Right angle USB-C adapter (used with six inch cable that is barely long enough) https://smile.amazon.com/Adapter-Cellularize-Extender-Extension-Nintendo/dp/B0882RJRQS You will also need at least a six inch USB-C adapter and a 12V USB-c charger that supports Power Delivery in the accessory socket. There are two components, the main tray, and a tpu mat to place under it to prevent any scratches. Remove the rubber factory liner before installing both.