Porsche 911 996 986 Boxster Phone holder - image

Files (1)

phone_holder.STL

STL

30.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
phone_holder.STL	Mount / bracket	30.3 KB STL	Slice file	Slice file	Slice file	Ensure the printed holder is securely attached to the car to prevent it from coming loose when removing the phone

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Porsche 911 996 986 Boxster Phone holder

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Printed in ABS, requires a the type of phone holder with a magnet on the phone and a sphere glued to the holder. The printed holder needs to be attached with screws or tape so that when you take the phone off, the whole thing does not come out, there is no spring force holding the thing to the car.