Porsche 911 991 981 Wireless Charging Tray iPhone13Pro - image

Files (1)

usb-c_911_tray_v2.stl

STL

256.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
usb-c_911_tray_v2.stl	Primary model	256.8 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Porsche 911 991 981 Wireless Charging Tray iPhone13Pro

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I took osunick's tray and added some blocks to make it fit an iphone13 pro. I also added a cutout on the bottom to allow for the flip up cover to sit. Same parts list work great. I added a USB-C car charger link for the lazy: Used with Anker 15W PowerWave Alloy Charging Pad: https://smile.amazon.com/Anker-Wireless-Charger-Fast-Charging-Adapter/dp/B07YD77RKC Right angle USB-C adapter (used with six inch cable that is barely long enough) https://smile.amazon.com/Adapter-Cellularize-Extender-Extension-Nintendo/dp/B0882RJRQS You will also need at least a six inch USB-C adapter and a 12V USB-c charger that supports Power Delivery in the accessory socket. https://www.amazon.com/gp/product/B08HYQLH1C There are two components, the main tray, and a tpu mat to place under it to prevent any scratches. Remove the rubber factory liner before installing both. Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: Overtrue Filament material: PETG.