Files (2)

Retainer_Pin.stl

STL

33.0 KB

Small_Gear.stl

STL

12.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Retainer_Pin.stl	Printable file	33.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Small_Gear.stl	Accessory piece	12.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Porsche 987 Cup Holder Parts

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Retaining pin and gear. I designed the retaining pin with thicker proportions to make it easier to print. I also increased the height of the gear to give more surface for it to mesh with the other gear. I used an 18 ga brad nail and a pair of needle nose plyers to push it into the hole and cut off the excess to around 3mm.