Porsche Cayenne Door switch panel guard - image

Files (1)

Driverside_Cayenne_Door_Switch_Guard.stl

STL

57.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Driverside_Cayenne_Door_Switch_Guard.stl	Primary model	57.7 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Porsche Cayenne Door switch panel guard

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

When temperatures are cool, and I have to leave my dogs in the Porsche Cayenne for a few minutes while I run into a store, my dogs would sometimes hit the buttons on the drivers side door panel. One of them is a hatch release button, so had to come up with something to protect against the pressing of that. Figured it was easiest to just create a panel that I can drop into place to protect all the buttons. Printed in PETG, then glued and covered the top with black leather to match the interior.