Porsche Macan EV Cubby Organizer - image

Files (1)

macan_cubby.stl

STL

12.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
macan_cubby.stl	Primary model	12.4 KB STL	46g $1.10	50g $1.20	110g $2.63	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Porsche Macan EV Cubby Organizer

0 downloads181 views0 likes

Shared by

Michael Chen

Verified

Description

I'd like to share a cubby organizer I modeled out and 3D-printed for the area beneath the climate controls for the 2024/2025 Porsche Macan EV. The cubby area doesn't have any large openings, so the best way I found to install the organizer is to slide it in from the side. The rule of thumb is to print using PETG for car accessories (to reduce heat warping), but in mild climates, I've been able to use PLA without much warping.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Porsche (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.