Files (3)

Lower.stl

STL

609.3 KB

Spine.stl

STL

63.9 KB

Upper.stl

STL

572.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Lower.stl	Printable file	609.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
Spine.stl	Printable file	63.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
Upper.stl	Printable file	572.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Power FC Mount for Toyota Supra

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this to hold my Apexi Power FC hand controller in my Supra, it mounts by screwing the mount to the inside of a DIN pocket under the head unit (works for single DIN radio installations ONLY) Hopefully this helps someone!