Magnificent_Densor-Gogo.stl

STL

81.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

13g

Based on 25% main infill across listed model files

Material cost

$0.30

Filament only at roughly $24/kg PETG / ASA

Print time

21m–36m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Magnificent_Densor-Gogo.stl	Primary model	81.8 KB STL	12g $0.28	13g $0.30	28g $0.66	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Supra Mk3 cluster's left gauge adapter for AEM-X Guage

0 downloads43 views0 likes

Shared by

Verified

Description

Modified version to fit the AEM guage, need to modify post, and drill hole for wires.

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Shaun Agostinho (sagostin) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.