Radio Knob Insert for Mini Cooper vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Radio Knob Insert for Mini Cooper vehicles

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Remixed from thing:1413442. >This is the plastic insert inside the rubber outer wrapper of the stock radio in a newer Cooper Mini Car. > >Outer rubber from original goes over this insert and the original metal insert goes on the inside. I found the original had too large of an inner diameter, even with the instruction to use the metal insert from the original knob. My 2005 Mini radio has a knob with a 4.8 mm D-shaft, so I have adjusted the design for that size. Metal insert is no longer required.