Shifter Knob - Exchangeable Top Part - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shifter Knob - Exchangeable Top Part

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

So the -shiftknob prints in 2 parts, both without supports! I will be adding some iterations i have made, with and without the shift pattern. The bottom if printed in ABS or ASA smooths out perfectly with acetone, with the top part you have to be careful, first time the numbers all just melted. It needs to be tightened and loosened a few times until it goes on smoothly.