Files (1)

Ram_Light_Housing_Assemply_Plug_01_v1.stl

STL

271.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ram_Light_Housing_Assemply_Plug_01_v1.stl	Primary model	271.2 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Ram Headlight Housing Plug

0 downloads64 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

When I upgraded my headlights to LED on my 2016 Ram, the new high beam LED extended beyond the light housing, making it necessary to create a new plug to conceal and protect the new LED. The housing extension is sloped in at a 15 degree angle to not conflict with the frame of the truck, as can be seen in one of the pics. Use the O-ring from the original plug. Lube the O-ring before putting on and tightening. Nice fit, good seal.