Ram truck 2009-2018 Auto headlamp cover - image

Files (1)

auto_lamp_cover.stl

STL

96.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

13g

Based on 25% main infill across listed model files

Material cost

$0.32

Filament only at roughly $24/kg PETG / ASA

Print time

23m–38m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
auto_lamp_cover.stl	Cover / cap	96.9 KB STL	12g $0.29	13g $0.32	29g $0.69	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Ram truck 2009-2018 Auto headlamp cover

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Cover to make headlights turn on automatically even in daylight. It bothers me that in fog only the daytime running lights turn on without tail lamps so I made this cover for the sensor on the dash and it makes the truck think its dark out all the time.