Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| part.STL | Primary model | 177.1 KB STL | Slice file | Slice file | Slice file | Ensure proper layer adhesion for outdoor use |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Rear wiper cover 28782-ED500 / 28782ED500
Shared by
3DPrintedCarPartDescription
Rear wiper cover for Nissan X-Trail T32, JUKE, Tiida Dimensions taken from original part 28782-ED500. The shape of the end is more angular (it didn't work out better), but otherwise the same. You can trim the spikes a little from the bottom. It's easier to close the lid this way ------------------------------------------------------------------------------------------------------------- Крышка заднего стеклоочистителя для Nissan X-Trail T32, JUKE, Tiida Сделана по размерам оригинальной запчасти 28782-ED500, Кончик более угловатый ( не получилось сделать лучше), но в остальном такой же. Можно немного подрезать шипы внизу (под углом), чтобы крышка легче оделась.
Compatible Cars
Originally published on thingiverse.com by Vitaliy Galchevskiy (Simbioziz) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
