rearview mirror holder subaru outback - image

Files (1)

rearview_mirror_hanger.stl

STL

23.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
rearview_mirror_hanger.stl	Primary model	23.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

rearview mirror holder subaru outback

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a parking hanging attachment. It works perfectly, but does hit the rearview mirror when going over any decent bumps, but it's just a small noise. I designed this because my parking permit couldn't be hung on the rearview mirror for my brand new car, Subaru Outback 2017. I did have to do some mild post-processing so the bracket and tall connector could actually fit before being snapped into place. There is a small bump INSIDE the tall connector that needs to be placed in the correct alignment when attaching the connector to the bracket, so just look for this prior to attaching on the mirror.