Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Subaru dash cam cable cover

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a direct clip on replacement for the cover above a 2008-2011 Subaru WRX self dimming mirror. If you have a dash-cam or other powered device such as radar detector mounted close to the mirror, or even a smartphone if you are driving Uber, you can use this to hold the cable(s) neatly in place to the top of the windshield, where you can hide them in the roof lining. As well as the WRX, this fits numerous other Subaru models that have the self-dimming mirror. To remove the original cover, simply slide it gently downwards towards the mirror, and lifting the edge closest to the glass outwards then ease the cover off. Repeat in the opposite direction to put the new one on Models with both left and right kicks are included depending on your cabling needs.