Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Renault_clip_v4.stl | Clip | 29.8 KB STL | 9g $0.22 | 10g $0.23 | 21g $0.51 | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Grand Scenic II Windscreen Wiper Clip
Shared by
3DPrintedCarPartDescription
My Renault Grand Scenic filled up with water in the front footwells and it turned out that I had 2 blocked drains. To get access to the drains I had to remove the plastic cover over the windscreen wiper mechanism and in doing so broke a clip. This is the replacement clip! It's working I've got 3 x working fine on my car because it turns out hat other people had already broken 2. If the clip needs to be a little tighter when you insert it into the plastic cover - just pry it open a little with a screwdriver.
Compatible Cars
Originally published on thingiverse.com by Danny Norcott (dnorcott7) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
