Renault Kangoo corks for car gallery - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Renault Kangoo corks for car gallery

0 downloads72 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Corks to plug the holes of the car gallery when you don't use the car gallery. This fits to a Renault Kangoo since 2001. It is possible to screw or unscrew the cork without any tool. Put some oil in the hole before screwing. The diameter of the bolt is M8. There are genuine corks but it needs a screwer to remove them. The corks are plastic made. When you use the screwer too many times, it damages the cork and it is very uneasy to unscrew it.