Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Pasek_klapki_schowka.stl | Primary model | 70.8 KB STL | 11g $0.27 | 12g $0.29 | 26g $0.64 | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Laguna II PHII radio cover bar
Shared by
3DPrintedCarPartDescription
There was a small plastic bar missing in my Renault Laguna II PHII shelf/radio cover. I didn't want to change the filament to black and didn't bother to check the original color so printed it out in neon white PETG at 0.12mm resolution using Ender 3. Fits perfectly. It's 1 minute design but you can use it if you don't want to draw or measure it by yourself. Shelf cover cleaned from original rubber and painted using black Plasti Dip.
Compatible Cars
Originally published on thingiverse.com by Dariusz Wydryszek (Wydryszek) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
