Renault Laguna Rear Sun Shade Clip - image

Files (1)

Laguna_v7.stl

STL

37.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
Laguna_v7.stl	Primary model	37.5 KB STL	Slice file	Slice file	Slice file	Print on its side for a nicer finish as recommended

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Renault Laguna Rear Sun Shade Clip

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement part for a Renault Laguna rear sun shade clip. I recommend printing the model on its side as it will end up with a nicer finish. As far as material choice goes, ABS or PETG is strongly recommended as it can withstand higher temperatures.