Based on 40% main infill across listed model files
Filament only at roughly $24/kg ABS / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Renault Megane I Wiper Cover Wind Deflector clips 7700834097
Shared by
3DPrintedCarPartDescription
These are the 2 plastic clips types found on the wiper cover wind deflector, the black plastic grille beneath the front wipers, in the lower part of the windshield. The grille (in 2 pieces) has plastic clips that easely brake and even if you buy a second hand grille, you would still find missing / broken clips. Unfortunately. Renault doesn't sell the clips separately. In fact, there are nowhere to be found.. Clip 2 has to be mirrored for left/right grille. Take care when orienting the piece in the slicer software, so you have the best strength. Print in ABS, without cooling fan. Supports are required. Hope it helps!:) The clips are tested and work perfectly.
Compatible Cars
Originally published on thingiverse.com by Ovidiu Turcu (Dutu) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
