Files (1)

Rivian_Phone_14mm_Y_and_80_mm_wide_5.stl

STL

551.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Rivian_Phone_14mm_Y_and_80_mm_wide_5.stl	Primary model	551.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Rivian Magsafe Phone Holder

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Pop your magsafe charger in the back, and this will lock into the usb cable channel in the Rivan glovebox. This size fits my iPhone 14 ProMax with a thin case well. Tension clips on the side keep phone stable during travel. The "dual" version was created because I couldn't swipe up to unlock an iphone with the phone vertical, so I had to move it sideways and then use both cable troughs as a lock.