Rivian R1S / R1T Raised Ball Mount PRO 17mm - image

Files (2)

Raised_Mount_17mm.3mf

3MF

126.7 KB

Raised_Mount_17mm.stl

STL

451.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Raised_Mount_17mm.3mf	Mount / bracket	126.7 KB 3MF	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping
Raised_Mount_17mm.stl	Mount / bracket	451.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Rivian R1S / R1T Raised Ball Mount PRO 17mm

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Phone mount for Rivian R1T/R1S that sits between gauge cluster and infotainment screen. Modified from the original RiviParts 17mm Pro to provide more height to the phone mount by approximately 3" to bring it more in line with the field of view. Please adjust printer settings appropriately to ensure proper strength and prevent it from snapping. A video of the mount being used on rough terrain can be seen here: https://www.youtube.com/shorts/BYJVuS8_MiI