s13 180sx hatchback backup reverse camera adapter 240sx - image

Files (1)

CAMERA_V3.stl

STL

21.7 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CAMERA_V3.stl	Primary model	21.7 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

s13 180sx hatchback backup reverse camera adapter 240sx

0 downloads191 views0 likes

Shared by

Michael Chen

Verified

Description

Made this backup camera bracket to hold my OEM Infiniti Q50 backup camera in my S13. This bracket and camera replace the trunk key lock with 180sx kouki taillights, requires some trimming of the backside of the center piece around the camera Due to the extra room with kouki tail lights this may not fit the standard 240sx center piece.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Nissan (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.