Saab 9-5 Aero open air Intake tube for K&N cone - image

Files (1)

saab_intake.STL

STL

461.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
saab_intake.STL	Primary model	461.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Saab 9-5 Aero open air Intake tube for K&N cone

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Intake tube to mount a K&N Universal Rubber Filter Part No RE-0910 to a 2003 Saab 9-5 Aero. (bonus, this filter is available at AdvanceAuto shipped 20% off with code P20 http://shop.advanceautoparts.com/p/k-n-universal-rubber-filter-re-0910/17400259-P?searchTerm=re-0910) I printed it on a Makerbot Replicator in ABS at 100% infill with standard resolution. The thing is strong enough that I can stand on it. The holes are approximate(there are 3 because I was not sure where I would need it) and you may have to drill one out to get it work. You will need a long bolt and nut. Has been installed for 2 months with no problems.