Files (2)

washercapmount.stl

STL

149.3 KB

washercapmount7.stl

STL

137.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
washercapmount.stl	Cover / cap	149.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
washercapmount7.stl	Cover / cap	137.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Saab 9-5 Washer Cover clip

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

washercapmount.stl - original size, doesn't fit printed cover/ washercapmount7.stl - smaller size, fits printed cover. washercapmount.stl - родной размер, в напечатанную крышку не подходит. washercapmount7.stl - доработанный для напечатанной крышки. Printed with PETG, layer 0.25, nozzle 0.5, no supports.