Saab 9-5 Washer Fluid Reservoir Cap - image

Files (2)

9-5_cap_looser.stl

STL

365.1 KB

9-5_cap_tight.stl

STL

366.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
9-5_cap_looser.stl	Cover / cap	365.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
9-5_cap_tight.stl	Cover / cap	366.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Saab 9-5 Washer Fluid Reservoir Cap

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

First, thanks for OstinStar for his great design for saab 9-3 washer fluid reservoir cap. I wanted the same looking cap for my 9-5 and his design needed couple modifications that i made. I removed the hinge because this is such a tight fit that it isnt needed, and that also made this a little cleaner looking. I made two versions: 9-5 cap tight.stl and 9-5 cap looser.stl Tight one needed a little sanding and it is a tight with atleast on my 1998 9-5 Looser version i havent printed, but it should fit more easily, but might need a little sanding also. Mine filler neck had some imperfection from molding, so it could be a slightly different in other 9-5s.