Files (1)

panel.stl

STL

644.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
panel.stl	Primary model	644.8 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

SEAT Ibiza 2009 Radio panel

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Work in progress This is a custom radio panel for the Seat Ibiza 2009 6J. It will fit into the car if you remove the original panel as well as the radio inside it. A 7" Touchscreen display (with a raspberry pi mounted onto the display) will fit inside of the cut-out space inside the panel and can be screwed together, using the 4 holes on the supports. Display: https://www.amazon.de/Raspberry-Pi-7-Inch-Screen-Display/dp/B014WKCFR4 The idea behind this project is to build a bluetooth radio for my car. You can find scripts that provide functions and further information at: (also work in progress) https://github.com/Roggerson/radio To be added: Cut-Outs for USB slots Any kind of feedback,questions and criticism is highly appreciated.