Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift knob for Subaru Forester

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I wanted to print something for my car, a Subaru Forester. I couldn't find any Forester shift knobs, so i had to draw my own. This is my first time using a 3D-program on my own, but i think it came out quite nice.:) I only split it in two to make it easier to print. I used 6pcs of M3x20mm to hold the top and bottom part together. The knob itself i just screwed on to shifter without any nuts. Drawn using "Onshape" Printed mine in PetG(Torwell) on my Wanhao Duplicator i3 V2.