Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| knob_bottom.stl | Printable file | 221.5 KB STL | Slice file | Slice file | Slice file | Use M6x20 screws for assembly |
| knob_top.stl | Printable file | 136.8 KB STL | Slice file | Slice file | Slice file | Use M6x20 screws for assembly |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru Forester Shift Knob
Shared by
3DPrintedCarPartDescription
Based on idea of two piece shift knob of http://www.thingiverse.com/thing:1488711 Uses 3 M6x20 screws, that cut directly into holes of bottom part. Bottom screws directly on shifter shaft. Subaru forester with manual transmission uses M12x1.25 thread. Such locking nut can be placed inside the bottom part. (I didn't use one). I used PLA. But be aware that temperature inside cabin can be well above 50°C, when PLA starts to soften and deform. Therefore, PLA is not the best choice for part, like a shifting knob. Give a shot PETG/ASA, or good ol' ABS.
Compatible Cars
Originally published on thingiverse.com by Michal Ingeli (ksyz) · License: CC0
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
