Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Dome_light_swtich.stl | Primary model | 105.6 KB STL | Slice file | Slice file | Slice file | Print with low speed and high resolution for detailed features |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru Forester Dome Light Switch
Shared by
3DPrintedCarPartDescription
Replacement light switch for 2004 Forester XS Dome light, I Understand this is the same part for the XT as well for the second generation of foresters (~ 2003-2008), may be the same for other Subarus. Do your research on Dome Light assembly 84601SA000NE. My switch was broken by a previous owner and nowhere to be found. Designed to be printed as shown, with full supports. Go Low and slow for resolution, and be careful removing support material. Also be very careful installing the switch as you can break the dome light fixture internal switch.
Compatible Cars
Originally published on thingiverse.com by (Megunia5101) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
