Files (2)

MShiftKnob-NoPattern.stl

STL

1.3 MB

MShiftKnob.stl

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MShiftKnob-NoPattern.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer
MShiftKnob.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Shift Knob (M12x1.25)

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This was inspired by the Mishimoto Ryan Tuerck shift knob I love, except with a M12x1.25 thread for my Subaru. It was designed so that it shouldn't need any supports. There are two versions, one with a 5 speed pattern with reverse under 5th gear and one without the pattern for those of you who are better than 5 speed... It was quickly measured and modeled in Fusion360 so its not perfect by any means. I've included the.f3d file so you can modify to your need. If you have any issues let me know in the comments and ill see what I can do to resolve them. Enjoy.