Files (4)

FRONT_CONSOLE.STL

STL

105.5 KB

REAR_CONSOLE.STL

STL

81.8 KB

CENTER_RIGHT_CONSOLE.STL

STL

83.7 KB

CENTER_LEFT_CONSOLE.STL

STL

83.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

50g

Based on 10% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
FRONT_CONSOLE.STL	Printable file	105.5 KB STL	Slice file	Slice file	Slice file	Glue the sections together after printing
REAR_CONSOLE.STL	Printable file	81.8 KB STL	Slice file	Slice file	Slice file	Glue the sections together after printing
CENTER_RIGHT_CONSOLE.STL	Choose right variant	83.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 10% infill. Pick the matching side before printing.
CENTER_LEFT_CONSOLE.STL	Choose left variant	83.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 10% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

SHIFT SURROUND for BMW 2002 TII

1 downloads285 views0 likes

Shared by

Michael Chen

Verified

Description

BMW 2002 SHIFT SURROUND LONG CONSOLE- This is the shift surround for a BMW e10 2002 long console. Works with OEM parts and with my triple gauge/radio panel. You will need to glue the sections together and finish the console by lots of sanding and filling. I find that Crazy glue works extremely well and high fill automotive primer. I finished the part off with SEM textured paint and then a coat of SEM Landau Black interior paint. You will need #8 "U" speed nut clips and corresponding 1" #8 sheet metal screws to screw it into the console sides. Part is very robust by just using a 10% infill and 4 layers. OEM parts are NLA and the few remaining are going for upwards of $400, so this is a great alternative. Enjoy the surround and please follow up with a comment and pictures. And as always, feel free to use the files personally but please do not use them for commercial ventures.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

2002 BMW E10

Published Mar 12, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.