Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Shifter H box with numbers for Toyota 22re transmission
Shared by
3DPrintedCarPartDescription
Exactly the same as Krisstto and mmongeon provided but with numbers on the top. Thank you for the design by the way. I printed it upside down as the bottom side usually turns out smooth. I printed one without support but the feet did get a little bit lopsided. Second attempt I used auto support in the printer settings and I think it came out looking decent. Made two files. One with the numbers protruding and one with the numbers sinked in. I have not tested to print with the protruding numbers yet. Is probably best to print that file with the numbers facing up. Use you own judgment.
Compatible Cars
Originally published on thingiverse.com by Robin Swaving (RobinSwa) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
