single oil cap remover / abre tapa de aceite for BMW 650 - image

Files (1)

650gs.stl

STL

56.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

11g

Based on 25% main infill across listed model files

Material cost

$0.27

Filament only at roughly $24/kg PETG / ASA

Print time

19m–32m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
650gs.stl	Primary model	56.6 KB STL	10g $0.25	11g $0.27	25g $0.60	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

single oil cap remover / abre tapa de aceite for BMW 650

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Esto es un llavero que sirve como herramienta para abrir la tapa del deposito de aceite de las BMW monocilindricas de 650cc, ya sean, F, G, Sertao, Dakar. No se si la G650/450X y la Xcountry llevan el mismo tapon. This is a key holder that also works as an oil cap removal tool for the BMW Motorrad 650cc thumpers. This means, F, G, Sertao and Dakar series. Not sure about if it will work on a G650/450X or Xcountry.