Files (4)

I_infield.stl

STL

15.8 KB

R_infield.stl

STL

115.3 KB

S_infield.stl

STL

130.5 KB

SiR_Badge.stl

STL

1.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
I_infield.stl	Accessory piece	15.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
R_infield.stl	Printable file	115.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
S_infield.stl	Printable file	130.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation
SiR_Badge.stl	Printable file	1.4 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

SiR grill badge for EP3 civic

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a grill badge for a Honda Civic EP3 SiR. It was modeled after the rear badge since it's what I had. I've left the infields of the letters as separate objects so they can be painted separately and then glued in. It has slots on the back to fit small zip ties for fastening.