Files (7)

skoda_camera_pillar.stl

STL

513.9 KB

skoda_camera_vent_clamp.stl

STL

83.7 KB

skoda_camera_vent_bracket.stl

STL

176.6 KB

skoda_camera_lower_hinge.stl

STL

176.6 KB

skoda_camera_hinge_plate.stl

STL

180.9 KB

skoda_camera_retainer.stl

STL

371.5 KB

skoda_camera_mount.stl

STL

489.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
skoda_camera_pillar.stl	Printable file	513.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_vent_clamp.stl	Printable file	83.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_vent_bracket.stl	Mount / bracket	176.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_lower_hinge.stl	Printable file	176.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_hinge_plate.stl	Printable file	180.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_retainer.stl	Printable file	371.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.
skoda_camera_mount.stl	Mount / bracket	489.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal printing and minimal supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Skoda Fabia Dashcam holder

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Getting tired of cameras falling off the sucker mounts and don't want to use adhesive pads so developed this bracket. Currently only fits a Skoda Fabia but could easily be adapted for other vehicles as each section screws together. These vehicle cameras are cheap but don't last all that long, the style is popular at the moment on eBay for around £20 and works well. If I have to change cameras in the future only the top plate needs to be redesigned. Bracket allows access to power button, connector and micro sd card. Some stl's are not orientated properly for printing, no time to correct at present but hopefully it should be fairly obvious. Contact me if in doubt.

Compatible Cars

Skoda Fabia

Updated Jul 15, 2026

Originally published on thingiverse.com by Pat Cooper (shrop_pat) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.