Smartphoneholder for Opel Astra K - image

Files (4)

Opel_Astra_K_Phoneholder_Part1.stl

STL

24.8 KB

Opel_Astra_K_Phoneholder_Part2.stl

STL

240.5 KB

Opel_Astra_K_Phoneholder_Part2_13mm.stl

STL

213.9 KB

Opel_Astra_K_Phoneholder_Part2_17mm.stl

STL

253.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Opel_Astra_K_Phoneholder_Part1.stl	Mount / bracket	24.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Opel_Astra_K_Phoneholder_Part2.stl	Mount / bracket	240.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Opel_Astra_K_Phoneholder_Part2_13mm.stl	Mount / bracket	213.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
Opel_Astra_K_Phoneholder_Part2_17mm.stl	Mount / bracket	253.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Smartphoneholder for Opel Astra K

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Deutsch: Ich habe das Model mit Fusion 360 gemacht. (Part 2 ist editierbar) Es wird zusätzlich eine Handyhalter für ein Kugelkopf benötigt. Kosten zwischen 2 - 8€ je nach Ausführung. Part 2 wird einfach in Part 1 Gesteckt, bei mir wurde kein Kleber benötigt. Nun gibt es unterschiedliche Größen vom Kulgekopf 13mm, 15mm, 17mm Bad English: I build this model with Fusion 360. A phone holder is also required, which is screwed onto a ball head. Costs between 2 - 8 € depending on the version. Part 2 is simply plugged into Part 1, no glue was needed for me.