Speaker Adapter Ring 5.25 to 6.5 inch - image

Files (1)

speaker_ring.stl

STL

115.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
speaker_ring.stl	Primary model	115.5 KB STL	Slice file	Slice file	Slice file	Ensure all parts are properly aligned before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Speaker Adapter Ring 5.25 to 6.5 inch

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The rear deck of my car accommodates a 5 1/4 inch speaker and I wanted to install some larger 6 1/2 inch speakers so I designed this adapter ring. Because my printer has a small build plate I had to create it to press together and divide it into four pieces. There's no need for glue. When it is mounted in place it will be nicely held together.