Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Strut_Mount_Cap.stl | Cover / cap | 678.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
strut tower dust cap for BMW vehicle
Shared by
3DPrintedCarPartDescription
This is a dust cap for the newer style BMW E30 strut mounts. The hole in the newer style is larger than the old ones and the original cap doesn't fit the replacement mounts, nor do the mounts come with their own dust caps. Mine measured 31.3mm but yours may measure differently. I think OEM is 32mm. To make a quick test print, flip the model upside down and sink it into the print bed so only the ring is printed. Make a couple of those stepping 1% at a time to find a nice tight slip fit, the ring will probably shrink when cool. Please note, this model doesn't have emblems shown in pics.
Compatible Cars
Originally published on thingiverse.com by Finger Chili (FingerChili) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
